Anti-corrosion treatment, painting of metal structures. Sandblasting and water jetting surface cleaning

Complex services on protection against corrosion of metal constructions (pipelines, tanks, towers, masts etc.) Include several stages.

Preparation for painting takes place in several stages. First, the surface cleaned of corrosive deposits and various contaminants.It is possible blasting, sandblasting, water jetting surface cleaning, "manual" or chemical treatment. Then the prepared surface is deducted using compressed air and degreased using various chemicals.This is followed by a process of isolation of the metal surface of the product from the effects of aggressive environment. Next, experts cover the work surface with special anti-corrosion compounds.

Painting of taps and bridges requires equally careful preparation. Our company takes the coloring of taps in different ways, selecting the most effective method of corrosion protection in each case.

After all these processes metal construction ground and paint using air, airless spray or manually (coloring of roller and brush), depending on specification and feasibility of a method of painting.

In carrying processes of works to protect metal structures from corrosion industrial alpinism - very effective due to the fact that the process enables hardware remote areas that are normally not available without the use of IAM.

Call us (044) 223-00-02 and (097) 223-00-02 or write to the email address: This email address is being protected from spambots. You need JavaScript enabled to view it., and our experts will perform for you anticorrosive processing, coloring of metal, sandblasting and the water jetting surfaces cleaning.